Peakbagger.com

Snapshot Year/Month Grid-Highest Point Reached

Ken Snyder's Ascents by Year/Month

Links for other Snapshot Grids:Use Metric Color Ranges
  Highest Peak Climbed    Most Prominent Peak Climbed    Most Isolated Peak Climbed    Most Vertical Gain Hiked    Highest Climber-Defined Quality    Top Ascents in all Categories  

 

YearJanFebMarAprMayJunJulAugSepOctNovDec
2009 Δ Guadalupe     Δ Langley    
2010        Δ White MountainΔ Black ElkΔ FlysΔ Mauna Kea
2011Δ Cahuenga Δ Pinos Δ Azusa  Δ Charles MoundΔ SantiagoΔ Hot SpringsΔ Hualapai 
2012 Δ HollywoodΔ Little Pine Mountain BenchmarkΔ Mission PointΔ San Benito  Δ WheelerΔ Elbert  Δ Haleakala
2013    Δ Big Pine Δ Ruby Dome  Δ Junipero Serra  
2014     Δ BeckyΔ ProspectΔ LassenΔ Yuba CoHP   
2015Δ Mauna LoaΔ Snow SummitΔ PerkinsΔ MangreedΔ CoronadoΔ Dolly Varden Mountains HPΔ Lewis   Δ Bell Canyon 
2016Δ Peak 906Δ Peak 1839Δ Los Pinos Δ Point 4850 Δ PearlΔ Peak 800Δ ButlerΔ Red Hill Δ Fremont
2017Δ Heart BarΔ Laskey Mesa PointΔ PuntaΔ Reservoir SummitΔ McGintyΔ Promontory LookoutΔ WilsonΔ TelegraphΔ Peak 6629 Δ Hazard 
2018  Δ WhaleΔ Gleason  Δ HooibergΔ EddyΔ HoffmannΔ Smatko Δ Peak 880
2019 Δ Signal de BotrangeΔ Pinos Δ Elbrus  Δ Cottonwood BenchmarkΔ Three Sisters Δ Grove BenchmarkΔ Calico
2020Δ Skinner  Δ GrindstoneΔ Waterman       
YearJanFebMarAprMayJunJulAugSepOctNovDec

 

Legend for Color Coding

20,000 feet or more
14,000 to 19,999 feet
10,000 to 13,999 feet
5,000 to 9,999 feet
2,000 to 4,999 feet
Below 2,000 ft

About the Snapshot Year-Month Grid

General Considerations:

  • "-X" after a peak name means an unsuccessful ascent, for example "Rainier-X".
  • A parenthetical name is a non-summit goal hike, for example, "(Snow Lake Hike)" or "(Rainier)".
  • The Δ triangle symbol is a hyperlink to the detailed Ascent Page for that ascent. The peak name is a link to the Peak Page for that peak.
  • The color of the cell shows how high, prominent, isolated, or high-quality the peak/ascent is, and the color ranges are shown in the legend to the left.
  • If the color is based on altitude, prominence, or vertical gain, you can switch between meters-based ranges or feet-based ranges. These are set up to be generally equivalent.

This grid comes in seven "flavors", each one showing a different "top" peak for a month. The flavors or categories are:

  1. Highest Point Reached. Can be an unsucessful attempt or non-summit goal hike.
  2. Highest Peak Climbed. Sometimes not the same as highest point, if that point was an unsuccessful ascent or a non-summit goal hike.
  3. Most Prominent Peak climbed. Note that many peaks in the Peakbagger.com database do not yet have a prominence value.
  4. Most Isolated Peak climbed. Isolation values may not be 100% accurate, since most are cacluated to nearest higher peak in the database.
  5. Peak with most vertical gain hiked. Note that many climbers do not enter vertical gain information on their ascents. Also, if several summits are grouped in a "trip", then the total gain for all ascents in that trip is assigned to the trip high point.
  6. Peak with the highest "Quality" value--this is a subjective number from 1-10 given by the climber. Note that many climbers have not given any of their ascents quality numbers.
  7. Finally, "Top Ascents in All Categories", which shows, for each month, the unique peaks from all the 6 other categories. In many cases, one or two peaks will be the leader in the 6 categories, since often the highest peak climbed for a month is also the highest point reached, the most prominent peak, and the one with the most gain. But in some cases several peaks may appear for a month.




Copyright © 1987-2020 by Peakbagger.com. All Rights Reserved. Questions/Comments/Corrections? See the Contact Page Terms of Service