Peakbagger.com

Ascent of Caverly Mountain on 2020-03-15

Climber: Eric Readinger

Other People:Solo Ascent
Only Party on Mountain
Date:Sunday, March 15, 2020
Ascent Type:Successful Summit Attained
Peak:Caverly Mountain
    Location:USA-New Hampshire
    Elevation:1439 ft / 438 m

Ascent Trip Report

Left Devil's Den Mtn and headed East on Caverly RD. As the road headed uphill and further away from summit I headed into the woods. It was a short distance until I came across an ATV trail. I followed this South until it felt like it was headed downhill. Then I went East uphill further through a dense beech until I found another ATV trail, so I followed it south and took a 90° East until it ended. Then followed some yellow ribbons up towards the summit. As the ribbons appeared to head further south I went due East for the ledges ans open rocks. Great views of the Belknap Range and Lake Winnipesaukee. Bushwhacked across summit to find the highest point. Then angled NE until I hit an ATV trail and followed it downhill until it went too far south, so I turned East and headed down.
Summary Total Data
    Total Elevation Gain:652 ft / 198 m
    Route Conditions:
Road Hike, Maintained Trail, Bushwhack
    Gear Used:
Skis
Ascent Statistics
    Gain on way in:652 ft / 198 m
    Distance:9.4 mi / 15.1 km
    Start Trailhead:787 ft / 239 m
Descent Statistics
GPS Data for Ascent/Trip


 GPS Waypoints - Hover or click to see name and lat/long
Peaks:  climbed and  unclimbed by Eric Readinger
Click Here for a Full Screen Map
Note: GPS Tracks may not be accurate, and may not show the best route. Do not follow this route blindly. Conditions change frequently. Use of a GPS unit in the outdoors, even with a pre-loaded track, is no substitute for experience and good judgment. Peakbagger.com accepts NO responsibility or liability from use of this data.

Download this GPS track as a GPX file




This page has been served 48 times since 2005-01-15.




Copyright © 1987-2021 by Peakbagger.com. All Rights Reserved. Questions/Comments/Corrections? See the Contact Page Terms of Service