Peakbagger.com

Snapshot Year/Month Grid-Highest Point Reached

Braxton Oeser's Ascents by Year/Month

Links for other Snapshot Grids:Use Meters Color Ranges
  Highest Peak Climbed    Most Prominent Peak Climbed    Most Isolated Peak Climbed    Most Vertical Gain Hiked    Highest Climber-Defined Quality    Top Ascents in all Categories  

 

YearJanFebMarAprMayJunJulAugSepOctNovDec
2005        Δ Sumner CoHP  Δ Tryon
2006Δ Kennesaw  Δ RooseveltΔ Laurel CoHP Δ WashingtonΔ MitchellΔ Big BaldΔ Bell KnobΔ Crockett RidgeΔ Becks Mountain Northeast
2007Δ Carmel Δ WoodallΔ Sewanee BenchmarkΔ Signal Knob Lookout Δ Boulder TopΔ Clingmans Dome  Δ Dickson CoHP 
2008Δ Short Δ Graveyard Hill Δ Gantt HillΔ Amelia CoHPΔ Pinos  Δ Keeney Knob  
2009 Δ Perry CoHP Δ Washington CoHP  Δ TuscaroraΔ High Point Δ Myles Knob  
2010Δ Cheaha     Δ Thicketty  Δ Metcalfe CoHPΔ House 
2011  Δ Sandia CrestΔ Buzzard Ridge  Δ Gurnsey Benchmark Δ MagazineΔ Henry Knob  
2012  Δ Saint Louis CoHP  Δ BlackΔ Latour Δ SandΔ Bear  
2013Δ Jaynes Hill    Δ Indian Springs Lookout   Δ Meteor Hill  
2014Δ McLean CoHP  Δ Jones CoHP  Δ Guyot     
YearJanFebMarAprMayJunJulAugSepOctNovDec

 

Legend for Color Coding

20,000 feet or more
14,000 to 19,999 feet
10,000 to 13,999 feet
5,000 to 9,999 feet
2,000 to 4,999 feet
Below 2,000 ft

About the Snapshot Year-Month Grid

General Considerations:

  • "-X" after a peak name means an unsuccessful ascent, for example "Rainier-X".
  • A parenthetical name is a non-summit goal hike, for example, "(Snow Lake Hike)" or "(Rainier)".
  • The Δ triangle symbol is a hyperlink to the detailed Ascent Page for that ascent. The peak name is a link to the Peak Page for that peak.
  • The color of the cell shows how high, prominent, isolated, or high-quality the peak/ascent is, and the color ranges are shown in the legend to the left.
  • If the color is based on altitude, prominence, or vertical gain, you can switch between meters-based ranges or feet-based ranges. These are set up to be generally equivalent.

This grid comes in seven "flavors", each one showing a different "top" peak for a month. The flavors or categories are:

  1. Highest Point Reached. Can be an unsucessful attempt or non-summit goal hike.
  2. Highest Peak Climbed. Sometimes not the same as highest point, if that point was an unsuccessful ascent or a non-summit goal hike.
  3. Most Prominent Peak climbed. Note that many peaks in the Peakbagger.com database do not yet have a prominence value.
  4. Most Isolated Peak climbed. Isolation values may not be 100% accurate, since most are cacluated to nearest higher peak in the database.
  5. Peak with most vertical gain hiked. Note that many climbers do not enter vertical gain information on their ascents. Also, if several summits are grouped in a "trip", then the total gain for all ascents in that trip is assigned to the trip high point.
  6. Peak with the highest "Quality" value--this is a subjective number from 1-10 given by the climber. Note that many climbers have not given any of their ascents quality numbers.
  7. Finally, "Top Ascents in All Categories", which shows, for each month, the unique peaks from all the 6 other categories. In many cases, one or two peaks will be the leader in the 6 categories, since often the highest peak climbed for a month is also the highest point reached, the most prominent peak, and the one with the most gain. But in some cases several peaks may appear for a month.




Questions/Comments/Corrections? See the Contact Page
Copyright © 1987-2014 by Peakbagger.com. All Rights Reserved.